Datenblatt für AHDP04-24-07PN-SRA Drawing

NOTES UNLESS OTHERWISE SPECIFIED I PLUG MATERIAL SHELL zINC ALLOV. NICKEL PLATED COUPLING RING ALUMINUM ALLOV. NICKEL PLATED INSERTAND RETAINING RING THERMOPLASTIC SEAL SILICONE RUBBER BACKSHELL MATERIAL SHELL ALUMINIUM ALLOY‘ NICKEL PLATED LATCH SEGMENT ALUMINIUM ALLOY. NICKEL PLATED SCREW AND LOCKWASHER STAINLESS STEEL. BUSHING EPDM SPECIFICATIONS a I OPERATING TEMPERATURE 7551 To MZS‘C a 2 DIELECTRIC WITHSTANDING VOLTAGE LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ ISDD VOLTS AC 3 a INSULATION RESISTANCE mm) MEGOHM MIN @ 251 a 4 MOISTURE RESISTANCE IPST B IPSBR (MATED CONDITION) 3 5 MATING CchE DURABILITv Ion CVCLES a S RnHS COMPLIANT APPLV To CABLE OD SIzE BM 2mm LIB CAN BE USED 41 WITH LARGE AND SMALL BUSHINGS IN PLACE 4 2 WITH oNLV LARGE BUSHING IN PLACE 4 3 WITH BOTH BUSHINGS REMOVED ALL DIMENSIONS ARE FOR REFERENCE USE ONLV SEE SPECIFIC PLUG DRAWING FOR 61 CONTACT SIzE AND WIRE RANGE 6 2 RETAINING RING COLOR 6 a MATING PART(SI 6 5 CONTACT LAVOUT AND ALL OTHER SPECIFICATIONS REVISIONS REV ECO DESCRIPTION DATE BV APPR R mmm K mamasmsg NV San‘LIH AHDMus.24.I QPR-OEQ I I ”I I “MRI ssmsnmwaw WWI Amphenol
NOTES: UNLESS OTHERWISE SPECIFIED
1. PLUG MATERIAL:
SHELL: ZINC ALLOY, NICKEL PLATED
COUPLING RING: ALUMINUM ALLOY, NICKEL PLATED
INSERT AND RETAINING RING: THERMOPLASTIC
SEAL: SILICONE RUBBER
2. BACKSHELL MATERIAL:
SHELL: ALUMINIUM ALLOY, NICKEL PLATED;
LATCH SEGMENT: ALUMINIUM ALLOY, NICKEL PLATED;
SCREW AND LOCK WASHER: STAINLESS STEEL;
BUSHING: EPDM.
3. SPECIFICATIONS:
3.1 OPERATING TEMPERATURE: -55
℃
TO +125
℃
.
3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2
MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC.
3.3 INSULATION RESISTANCE: 1000 MEGOHM MIN @ 25
℃
.
3.4 MOISTURE RESISTANCE: IP67 & IP69K (MATED CONDITION).
3.5 MATING CYCLE DURABILITY: 100 CYCLES
3.6 RoHS COMPLIANT
4. APPLY TO CABLE OD SIZE: Ø11.20-Ø24.08 . CAN BE USED:
4.1. WITH LARGE AND SMALL BUSHINGS IN PLACE.
4.2. WITH ONLY LARGE BUSHING IN PLACE.
4.3. WITH BOTH BUSHINGS REMOVED.
5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY.
6. SEE SPECIFIC PLUG DRAWING FOR:
6.1 CONTACT SIZE AND WIRE RANGE.
6.2 RETAINING RING COLOR.
6.3 MATING PART(S).
6.4 CONTACT LAYOUT AND ALL OTHER SPECIFICATIONS.
AHDM06-24-19PR-059
RELEASED 16MAR2020 J. HEADA1
OF:SH:REV:DWG NO:TITLE:
REV DESCRIPTION DATE
REVISIONS
ECO APPRBY
11
A1
KIT,PLUG AND BACKSHELL,SZ 24
44724 Morley Drive
Clinton Township, MI 48036
Sine Systems - www.amphenol-sine.com
Amphenol
MATERIALS LIST
SIZE
PROCESS SPECIFICATIONS:
MATERIAL SPECIFICATIONS:
UNLESS OTHERWISE SPECIFIED
3 PL DEC ±0.08
1) All dimensions are in metric(mm).
2) Tolerances are as follows:
1 PL DEC ±0.30
2 PL DEC ±0.15
QUANTITY
SIGNATURES
Fractions ±1/64
Angles ±1°
APPROVAL:
ENGINEER:
CHECKED:
DRAWN:
SCALE:
DATE
PART NUMBER
REVISION
DWG NO:
C-
TYPE
SHEET OF
ITEM
DESCRIPTION
THIS DRAWING IS SUPPLIED FOR
INFORMATION ONLY. DESIGN FEATURES,
SPECIFICATIONS AND PERFORMANCE DATA
SHOWN HEREON ARE THE PROPERTY OF
THE AMPHENOL CORPORATION. NO RIGHTS
OF REPRODUCTION ARE IMPLIED. ALL
DIMENSIONS ARE SUBJECT TO NORMAL
MANUFACTURING VARIATIONS.
CUSTOMER:
NEXT ASS'Y:
X
3) Note reference =
DURAMATE AHDM PLUG, SIZE 24, WD THD,
KIT W/ CABLE CLAMP BACKSHELL
B
AHDM06-24-19PR-059
A1
1 1
J. HEAD
16MAR2020
NONE
DH--
Ø45.7
2X RECOMMENDED TORQUE : 1.5-2.0 NM
BUSHING
2X SCREW AND
LOCK WASHER
2X LATCH SEGMENT
BACKSHELL
118.1
ASSEMBLED
PLUG
AHDM06-24-19PR
BACKSHELL
AHDMBS-24-059
KIT
AHDM06-24-19PR-059
Ø18.8
LARGE BUSHING
SMALL
BUSHING
HD36-24-19PE-059