Search Results

PROJECT

Wireless Gesture Controlled Robot

By SparkFun Electronics

Control the RedBot wirelessly based on the movement of your hand using an accelerometer and XBees!

Image of TPL5110 Nano Power Timer Hookup Guide

TUTORIAL

1’308

TPL5110 Nano Power Timer Hookup Guide

By SparkFun Electronics

In this tutorial, we'll discuss how the time is set with the on board six DIP switch and use a microcontroller to turn it off when a task is finished.

Image of SparkFun 9DoF IMU (ICM-20948) Breakout Hookup Guide

TUTORIAL

215

SparkFun 9DoF IMU (ICM-20948) Breakout Hookup Guide

By SparkFun Electronics

In this hookup guide, we'll connect our sensor up to our Esp32 Thing Plus microcontroller and run a of quick (Qwiic) example to get you up and running with this fantastic board!

TUTORIAL

Pi Servo pHAT (v2) Hookup Guide

By SparkFun Electronics

The SparkFun Pi Servo pHAT provides your Raspberry Pi with 16 PWM channels that can be controlled over I2C. These channels are broken out in a header combination that is perfect for connecting servo motors.

TUTORIAL

PCA9306 Logic Level Translator Hookup Guide (v2)

By SparkFun Electronics

The PCA9306 is a dual bi-directional voltage translator for the I2C-bus and SMBus. It works at a range of voltages between 1.2V and 5.0V and doesn't require a direction pin to function. This is a great board for shifting voltages between sensors and your microcontroller.

PROJECT

SparkFun PIR Breakout Hookup Guide

By SparkFun Electronics

Looking to add some motion detection to a project you are working on? The SparkFun PIR Breakout - 170uA (EKMC4607112K) and SparkFun PIR Breakout - 1uA (EKMB1107112) might be just the thing!

PROJECT

Qwiic Pro Micro USB-C (ATmega32U4) Hookup Guide

By SparkFun Electronics

In this tutorial, we'll check out the updated Qwiic Pro Micro and go through a few examples to get you started!

PROJECT

102

SparkFun Qwiic Button Hookup Guide

By SparkFun Electronics

These breakouts eliminate nearly all the inconvenience of using buttons by converting everything to an easy-to-use I2C connection using the Qwiic Interface.

PROJECT

Temperature Sensor Comparison

By SparkFun Electronics

This article will compare a few of the more popular ones we carry.‎

PROJECT

3D Printed Illuminated Wand Prop

By SparkFun Electronics

In this tutorial, we will learn about how to create a theatrical prop for a performance by 3D printing a wand and adding an LED.

PROJECT

Flashlight Kit

By SparkFun Electronics

The Flashlight Soldering Kit is a basic soldering kit designed to help teach the basics of through hole soldering and circuit design. This tutorial will go over the basics of a circuit, how to solder, and show you how to build your own flashlight.