Impostazioni
Consegna rapida
Spedizione gratuita
Incoterms
Modalità di pagamento
Prodotto Marketplace
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Slide 35
Slide 36
Slide 37
Slide 38
Slide 39
Slide 40
Slide 41
Slide 42
Slide 43
Slide 44
Slide 45
Slide 46
Product List
To quickly evaluate the MAX2870 follow these simple steps: Connect the INTF-3000 interface board to a PC via USB cable. Connect the INTF-3000 to the EVKIT with the ribbon cable provided. Connect a 3.3V DC power supply source to the EVKIT. The EVKIT output is observed with a spectrum analyzer at RFOUTAP. Load the EVKIT software onto a PC. Use the GUI to setup all PLL parameters and modes of operation. The MAX2870 EVKIT includes an on-board 50MHz crystal oscillator reference input, so an external frequency reference source is not needed. The EVKIT also includes an on-board loop filter.
PTM Published on: 2014-02-13
Svizzera